Phottix Mitros+ Overview

Full E-TTL / E-TTL II capabilities for usage with Canon cameras are provided by the Phottix Mitros+ TTL Transceiver Flash, which also includes an integrated Odin transmitter and receiver. With a zoom range of 24 to 105mm, the Mitros+'s guide number at ISO 100 in the 105mm position is 190', which is helpful for illuminating subjects. The flash also offers wireless transmission through optical pulse or IR triggering, access to 4 channels, and support for 3 groups.

This radio transmission and reception are compatible with Strato II transmitters in addition to full compatibility with the Odin-series wireless devices. Also, this Mitros+ has memory functions for saving up to three sets of flash and function information for quickly changing when needed.

The flash head has the ability to rotate 180° in each direction and tilt from -7° to +90°. This allows for excellent control over bounce angles during a shoot. Also, the Mitros+ features a recycle time of 0.1 to 5 seconds that can be improved to 2.5 seconds with a quick flash mode.

Additionally, this flash unit features full manual controls and customizable shooting options that include high-speed sync and stroboscopic shooting modes. The flash runs on 4 AA batteries and comes with an attachable diffuser for softening light when needed. Other accessories include a soft case, 3.5mm sync cable, USB cable, USB drive with manual, an adapter for external power packs, and a flash stand.

• Radio transmission is compatible with Odin and Strato II wireless triggering systems up to 328' away
• Wireless functionality via optical pulses in 4 channels and 3 groups with a range of up to 52.5' indoors
• Ratio modes from 1:8 to 1:1 and 8:1 are available for firing multiple flash units
• A modelling flash setting is available for previewing how your shot will turn out
• High-speed synchronization allows you to fire using the fastest shutter speed available on your camera
• A bounce card and wide-angle diffuser are built into the flash head for convenience
• Stroboscopic mode fires a series of flashes at a frequency of 1-199 Hz for up to 100 flashes
• Status LED lights will notify you when the flash is ready to fire
• Overheating protection will slow the firing time to avoid damage from heat
• AF-assist light for focusing in poor lighting conditions
• Memory system for retaining your settings when the flash is powered off
• 3.5mm sync port for connecting this flash to a larger system
• USB port for installing firmware updates