You May Also Like

The Essentials:

Action Mounts:

Bags, Cases & Straps:

Tripods & Monopods:

Flashes & Lighting:

Cleaning & Maintenance:

Audio Equipment:

Studio Lighting:

Cables & Connectivity:



A Versatile USB Mic for Podcasting, Streaming & Recording

Give yourself and your audience broadcast-quality sound with the Rode NT-USB+, a versatile microphone solution suitable for podcasting, streaming, gaming, and recording. With a full frequency response and tight cardioid polar pattern for clear, focused audio, the studio-grade capsule evokes the sound of a classic large-diaphragm condenser microphone, delivering warmth and clarity; use it on a wide range of sources, from vocals and speech to acoustic guitar and other instruments. The NT-USB+ has a USB-C connector that is class-compliant for use with computers, as well as iOS and Android tablets and smartphones.

Revolution Preamp & APHEX-Powered DSP

The Rode NT-USB+ is a revised version of the original NT-USB mic, upgraded with a built-in Revolution preamp and a DSP chip for vocal processing.

The high-gain, low-noise Revolution preamp provides 20 dB of gain to ensure a robust signal level for the 24-bit / 48 kHz analog to digital converter.

A built-in DSP chip allows the mic to process your vocals internally without taxing your computer's processor and incurring latency.

Apply advanced APHEX audio processing via Rode's free podcasting and streaming software, Rode Connect. This includes a high-pass filter for cutting out low-end rumble, a noise gate for eliminating background noise, a compressor for delivering punchy and balanced sound, and the legendary Aural Exciter and Big Bottom effects for rich, broadcast voice tone.

Easy-to-Use, Performance-Ready Features

Podcasters will appreciate the cardioid polar pattern, which naturally reduces room noise by rejecting much of the audio to the back and rear of the mic capsule.

The included pop filter attaches to the microphone and minimizes p-pops and plosives.

A 3.5mm headphone jack with volume control is provided for latency-free monitoring, and musicians will appreciate the Mix Control dial, as it allows them to balance the level between their vocals and pre-recorded instruments.

Mount the NT-USB+ to the included mini tripod for instant desktop use.

A ring mount for your own mic stands is provided along with a 9.8' USB-C to USB-C cable to connect to a computer or mobile device.


Primary Applications Studio Recording, Podcast, Web-Streaming, Recording to Mobile Device, Conferencing
Form Factor Stand/Boom Mount
Intended Sound Sources Speech/Voice Over, Instrument
Sound Field Mono
Operating Principle Pressure Gradient
Polar Pattern Cardioid
Orientation Side Address
Circuitry Solid-State
On-Board Controls Direct Monitor Blend, Headphone Volume


Frequency Range 20 Hz to 20 kHz
Maximum SPL 118 dB SPL (10% THD)
Dynamic Range 97 dB


Output Connectors (Digital) 1 x USB-C Female (on Mic)
Headphone Connector 1 x 1/8" / 3.5 mm


A/D Conversion 24-Bit
Sample Rate 48 kHz
Digital Signal Processing Compressor, EQ, Noise Reduction, Sound Presets (via Software)
OS Compatibility Windows
*As of November, 2022: Check with manufacturer for the most up-to-date compatibility


Bus Power USB
Operating Voltage 5 V (USB Bus Power)
Operating Current Consumption 500 mA


Color Black
Mounting Desktop Stand, Mic Clip/Stand Adapter (with Included Hardware)
Included Filters Pop Filter
Dimensions H: 50 x W: 62 x L: 184 mm
Weight 540 g (Microphone, without Mount, without Windscreen)

* Specifications subject to change by the manufacturer without notice

  • Rode NT-USB+ Professional USB Microphone
  • Pop Shield
  • Tripod Desk Stand
  • Ring Mount
  • USB Cable (9.8')

Manufacturer Warranty

This product comes with a

12month Australian warranty

from Rode Australia

Want to read more about warranties?

Click here


* Dispatch timeframes are indications only and may vary for multiple quantities. Timeframes are updated regularly during normal business hours.