You May Also Like

The Essentials:

Bags, Cases & Straps:

Tripods & Monopods:

Cleaning & Maintenance:

Protection & Waterproof:

Viewfinder & LCD:

Studio Lighting:

Storage:

Other:

NiSi S6 150mm Filter Holder Kit with Pro CPL for Sony FE 12-24mm f/4 G Lens

This NiSi S6 150mm Filter Holder Kit is specifically designed for the Sony FE 12-24mm f/4 G lens. It includes the S6 filter holder, a lens-specific threaded adapter ring to attach the holder to the lens, a circular CPL filter, a lens cap and a filter pouch to fit the entire kit. The filter holder can also support an optional 150mm rectangular filter, allowing you to use one circular and one rectangular filter simultaneously.

NiSi S6 150mm Filter Holder Frame

This S6 150mm Filter Holder from NiSi features two filter slots for the convenient use of up to two 150mm wide, 2mm thick square or rectangular filters. Each slot is designed to grip an installed filter only along the surface of the filter's edges, so contact with a filter's front or rear-facing surfaces is avoided. Positioning filters is particularly important when using 170mm-long graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot. The S6 system allows the filter holder to rotate, and it has a lock to hold it in position. The filter holder supports the use of a rotating circular CPL.

This is the same filter holder found in the NiSi S6 Filter Kit. It is the filter holder only and does not include the required S6 adapter rings.

  • Compatible with NiSi S6 150mm Filter Holder Kit
  • Filter holder only; requires S6 adapter rings
  • Holds two 150mm wide, 2mm thick filters
  • Compatible with 150 x 150mm and 150 x 170mm filters
  • Pull-and-release locking pin on the filter holder allows a reliable connection
  • Lock design locks the holder to an adapter ring

NiSi S6 PRO CPL Filter for S6 150mm Holder

The NiSi S6 PRO CPL Filter is designed for use with a NiSi S6 150mm filter holder system. When screwed into a NiSi S6 150mm filter holder adapter ring, it can help to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface. This results in a noticeable reduction of glare and reflections from non-metallic surfaces and an increase in the saturation of skies and foliage. It is constructed from glass for clarity and features an aluminum-alloy filter ring for durability while remaining lightweight.

  • Compatible with the NiSi S6 150mm filter system.
  • It can be screwed into a NiSi S6 150mm filter holder adapter ring.
  • Helps to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface.
  • It is constructed from optical glass for clarity and features an aluminum-alloy filter ring for durability while remaining lightweight.
  • Clears up haze in distant landscapes and provides more saturated and vivid colors.
  • Strongest effect when used at a 90° angle from the sun.
  • Constructed from optical glass for clarity.
  • Nano-coating, waterproof coating, and low reflection are some additional features of the filter.
  • If using this with an older generation S5 adapter, the S6 holder frame must be used in combination.

NiSi Protection Lens Cap for NiSi S5 & S6 150mm Filter Holder Kits

This NiSi Protection Lens Cap is designed to attach to a NiSi S5 or S6 150mm Filter Holder Kit's adapter ring when the kit's filter holder is removed. While in use, this lens cap can protect a NiSi S5/S6 circular polarizer filter installed on the adapter ring while the adapter ring remains on a lens.

NiSi S6 150mm Filter Holder Pouch

This S6 150mm Filter Holder Pouch from NiSi provides a secure and convenient transport and storage solution for a NiSi S6 150mm filter holder kit. The pouch's main compartment accommodates the kit's adapter ring together with its filter holder, and a separate pocket can be used to hold the kit's polarizer filter or another separately available screw-in filter compatible with the adapter ring.

This durable and convenient filter pouch can be used to keep its contents protected and organized inside a larger bag or case. The rear of the pouch features a loop to allows it to be fastened to a camera bag or a tripod leg, putting the filter holder kit within more immediate reach. The interiors of this pouch's main compartment include nonabrasive surfaces, and its exterior features a durable nylon construction. It has a hook-and-loop touch tab closure.

  • Holds NiSi S6 150mm Filter Holder System
  • Filter holder and adapter ring compartments
  • Hook-and-loop closure
  • Pocket for a polarizer filter
  • Compatible with the previous generation S5 System and Q System
NISI S6 150MM FILTER HOLDER FRAME
   
PHYSICAL  
   
Filter Capacity 2 x 150 x 150 mm, 150 x 170 mm (2 mm Thick)
   
NISI S6 PRO CPL FILTER FOR S6 150MM HOLDER
   
PHYSICAL  
   
Filter Type Circular Polarizer
Circular Size 150 mm via Included Adapter Ring
Coatings Multi-Coating
Filter Material Glass
Ring Material Aluminum
   
NISI PROTECTION LENS CAP FOR NISI S5 & S6 150MM FILTER HOLDER KITS
   
PHYSICAL  
   
Material of Construction Plastic


* Specifications subject to change by the manufacturer without notice

  • NiSi S6 150mm Filter Holder Frame
  • NiSi S6 150mm Filter Holder Adapter Ring for Sony FE 12-24mm f/4 Lens
  • NiSi S6 PRO CPL Filter for S6 150mm Holder
  • NiSi Protection Lens Cap for NiSi S5 & S6 150mm Filter Holder Kits
  • NiSi S6 150mm Filter Holder Pouch

Manufacturer Warranty


This product comes with a

12month Australian warranty

from NiSi Australia

Want to read more about warranties?

Click here

Reviews

* Dispatch timeframes are indications only and may vary for multiple quantities. Timeframes are updated regularly during normal business hours.