You May Also Like

The Essentials:

Bags, Cases & Straps:

Tripods & Monopods:

Cleaning & Maintenance:

Audio Equipment:

Other:

Whether you’re presenting for television or live on-stage, in a 20,000 seat auditorium or in a house of worship, RØDE has your needs covered with the reliable and discreet Rode Lavalier Microphone. Featuring the pure, clear audio and low handling noise that RØDE is celebrated for, the Rode Lavalier is built to deliver and to last. 

The included water resistant pop filter and mini-furry for high wind protection ensure quality recordings in adverse environments, while the anti-trauma water-resistant case provides rugged and secure protection for the microphone, cable and accessories. Knowing that versatility is paramount in any product, RØDE have developed the MiCon™ connector system which provides seamless integration between the Rode Lavalier and a wide range of wireless systems. The RØDE Lavalier lapel microphone is covered by RØDE Microphones' innovative 5 year 'no questions asked' warranty which provides 12 months of complete cover, and an optional replacement microphone during the extended warranty period.

* Note requires an optional wireless transmitter bodypack system and optional MiCon connector depending on the wireless system being used (please see table below). Or if using connected via cable, camera or device must deliver power to microphone, or 48V phantom power when using the MiCon-5 Adapter.

MiCon Adapters

Adapter

System

Compatible with

MICON-1 

Sennheiser transmitters SK 500 G3, SK 300 G3, SK 100 G3, SK 500 G2, SK 300 G2, SK 2 Freeport

HS1 Headset, PinMic, Lavalier

MICON-2

Standard 3.5mm stereo mini jack, with a power supply of 1V minimum.

HS1 Headset, PinMic, Lavalier

MICON-3

Shure transmitters UR1, UR1M, ULX1, SLX1, PGX1 and PG1.

HS1 Headset, PinMic, Lavalier

MICON-4

Audio Technica UniPakTM Body-Pack transmitters 1800, 2000 and 3000.

HS1 Headset, PinMic, Lavalier

MICON-5

Standard 3 pin XLR, with P48 phantom power.

HS1 Headset, PinMic, Lavalier

MICON-6

AKG transmitters PT40, PT60, PT61, PT80, PT400, PT2000 and PT4000, as well as the Audix RAD-360.

HS1 Headset, PinMic, Lavalier

MICON-7

Lectrosonics transmitters SM Series, UMa Series, LMa Series and UM450.

HS1 Headset, PinMic, Lavalier

MICON-8

Sony UWP transmitters.

HS1 Headset, PinMic, Lavalier

 

Specifications

Acoustic Principle

Pressure Gradient

Active Electronics

JFET impedance converter

Capsule

0.10"

Polar Pattern

See Polar Response Image Grah (above)

Address Type

End

Frequency Range

60Hz - 18kHz

Output Impedance

3000O

Maximum SPL

110dB SPL (@ 1kHz, 1% THD into 1KO load)

Maximum Output Level

189.0mV (@ 1kHz, 1% THD into 1KO load)

Sensitivity

-33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz

Power Options

(P48 through MiCon-5 adaptor, 2V~5V through all other MiCon adaptors)

Weight

1.00gm

Dimensions

12.00mmH x 4.50mmW x 4.50mmD

Output

MICON

* Specifications subject to change by the manufacturer without notice

Rode Lavalier Microphone
Anti-trauma Case
Pop Screen (WS-LAV)
Minifur (MINIFUR-LAV)
MiCon Cable 1.2m
Lapel Clip (LAV-CLIP)
Spanner

Reviews

* Dispatch timeframes are indications only and may vary for multiple quantities. Timeframes are updated regularly during normal business hours.