Fujifilm Wireless Flash Commander EF-W1
SKU code: 46759
- Wireless flash control with radio frequency
- Full Creative Control
- Control multiple flash units
- Compatible with TTL, manual & FP high speed sync
- 4 different groups & 8 channels.
- 1/3EV incremental control of flash power
You May Also Like
Batteries & Chargers:
Full Creative Control
Work with new creative concepts by utilising the Fujifilm Wireless Flash System without compromising on options. The trigger will control Fuji Flash Units with wireless support such as the Fujifilm EF-60 with the ability to use manual flash mode TTL, and even FP High-Speed Sync mode on supporting cameras. You are able to control multiple remote flash units with the ability to put units into up to 4 different groups. The commander unit also works across 8 different channels. Finite control is available with 1/3EV incremental control for the flash output power in Manual Mode and TTL mode over and under exposure compensation . Manual mode will even allow for the flash power to reduce down to 1/256 power allowing for very subtle flash lighting.Radio Controlled
The radio frequency on the Fuji EFW1 enables remote flash use of distances that are far away and out of direct line of sight. They can also be used in bright available light, unlike systems that utilise infrared, as they do not rely on any light transmission to work.Nissin Air System
By utilising the Nissin Air System (NAS) for control, this trigger is also compatible with NAS compatible Nissin speedlites. This opens up the options for wireless flash photography with the X and GFX Series cameras. The Fujifilm Wireless Flash Commander EF-W1 will give you finite flash and expressive flash control for perfect exposures allowing you to master your surrounding environment.| Compatibility | |
| Compatible Cameras | GFX100 / GFX 50S / GFX 50R / X-H1 / X-Pro3 / X-Pro2 / X-T4 / X-T3 / X-T2 / X-T1 / X-T30 / X-T20 / X-E3 / X100V / X100F |
| Other compatible devices | |
| Nissin flash with Nissin Air System(NAS) | |
| Specification | |
| Wireless Communication Unit | |
| Communication Method | NAS(Nissin Air System)*1 |
| Frequency Range Used (center frequency) | 2409 – 2476 MHz |
| Wireless Maximum Output | 8 dBm (EIRP) |
| Communication Channel | 8 channels |
| Remote Group | 4 Groups |
| Maximum number of flashes used simultaneously | 30 |
| Functions | |
| Action mode | Radio Wireless Commander (TTL, Manual, OFF) |
| TTL Flash Exposure Compensation Control | ±2EV, 1/3EV steps |
| Manual Flash Control | 1/1 – 1/256, 1/3EV steps |
| FP (high speed sync) Emission Control | Compatible (when using a compatible camera) |
| The Coverage (zoom) | 24 – 200mm (35mm format conversion), auto zoom |
| Recycling Time | Max. approx. 10 times/second |
| Other Functions | Firemware update by microSD card, open mode*2, modeling light control*2 that allows to |
| control one flash from multiple wireless commanders. | |
| Power Supply and Others | |
| No. of Flashes | Approx. 3,000 times (when using alkaline batteries)*3 |
| Power Supply | 2 x AAA batteries (Ni-MH batteries, alkaline batteries) |
| Using Temperature Range | -10 to 40 degrees Celsius |
| Dimension (Height x Width x Depth) | Approx. 61mm x 62mm x 68mm |
| Weight | Approx. 73g (without battery) |
| NOTES | |
| *1 NAS(Nissin Air System) is a registered trademark of Nissin Japan Ltd. | |
| *2 Compatible with MG10, MG8, MG80 Pro manufactured by Nissin Digital. | |
| *3 It depends on the shooting conditions and batteries used. |
* Specifications subject to change by the manufacturer without notice