PocketWizard PlusX Wireless Flash Transceiver - Twin Pack
SKU code: 27740
- Twin Pack - Includes 2x PlusX Transceivers
- Combination Transmitter and Receiver
- 10 Standard Channels
- Auto-Sensing Transceiver
- Auto-Relay Mode
- Transmit Only Mode
- Status Indicator/Battery Life Indicator
- Exceptional Range and Reliability
- Compatible with all Standard Channel PocketWizard Products
Call to check availability
You May Also Like
Cables & Connectivity:
Set both transceivers to the same channel and you are ready to shoot. The auto-sensing PlusX Transceiver is also compatible with many popular camera systems and acts as a wireless shutter release when combined with a dedicated remote camera triggering cable*.
An auto-relay mode lets you trigger a remote camera and remote flashes using only 3 Pocketwizard Transceivers. Simply connect your flash to a PlusX Transceiver, your Camera to another PlusX Transceiver and trigger both with a 3rd PlusX transceiver in your hand.
With 10 Standard Channels that are consistent across the entire PocketWizard range, you can be confident the Plus X will integrate seamlessly with your existing PocketWizard equipment. 100 hours of continuous operation is delivered through 2 AA batteries (not included) with a handy LED status indicator to indicate when battery levels are between 50% and 75% depleted.
Synonymous with quality, reliability and exceptional range, the PocketWizard PlusX Transceivers are made in the USA and are backed by a 12 month warranty.
This twin pack includes two Pocketwizard PlusX Transceivers.
*Sold Separately.
Frequency: | CE: 433.62 MHz EU/Asia/Other |
Channels: | 10 channels Reverse compatible with all PocketWizard radios using Standard channels using same frequency. |
Zones: | Single zone |
Antenna: | Precision tuned internal coil |
Channel Setting: | Backlit rotating dial |
Range: | Up to 500 meters (Actual range is dependent on multiple factors including equipment, mode, environment, positioning, orientation and interference) |
Sync Speed: | Up to 1/250 for focal plane shutters Up to 1/500 for leaf shutters |
Triggering Speed: | Up to 14.5 frames per second (FPS) |
Contact Time: | 62 milliseconds in normal operation |
Status Indicator: | LED: Green, Amber, Red status indications Solid Red: Triggering signal sending or receiving Single Green Blink: Status OK, > 50% battery life Double Amber Blink: Battery life < 50% but > 25% Triple Red Blink: Battery life < 25%, change batteries |
Transmit Output Power: | Less than 1 milliwatt (0.001 watt) |
Power: | Two (2), AA (LR6), 1.5v alkaline recommended NiMH, NiCAD, NiZn, Lithium acceptable (these chemistries may not report battery life accurately) DO NOT USE 3.6V Li-Ion AA cells! |
Battery Life: | Up to 100 hours (with alkaline batteries) |
Max Port Sync Voltage: | 300 Volts (Camera/Flash Port) |
Mac Current Handling: | 1.0 A peak, 0.2 A (1/5 Amp or 200 milliamp) continuous current limited |
Voltage Present: | 3 volts, safe for use with all digital and film cameras |
USB: | None |
Housing: | High impact plastic with captive battery door |
Weight: | 3.9 ounces (110 grams) with batteries installed |
Dimensions: | Height: 10.7 cm Width: 5.3 cm Depth: 3.0 cm |
Operating Temperature: | Above -15°C and below 50°C |
Storage Temperature: | Above -30°C and below 85°C (without battery) |
Input/Output: | 3.5mm (1/8") stereo miniphone jack, hot shoe |
Mounting: | Hot shoe, lanyard/D-Ring loop, 1/4-20 threaded insert |
In the Box: | Quick Guide Stereo 3.mm (1/8") miniphone to miniphone cable Mono 3.5mm miniphone to locking PC cable Stereo 3.5mm miniphone to 6.3mm (1/4") adapter Lanyard |
RoHS Compliant: | Yes |
Optional Accessories: | Isolation bar, trigger buttons, camera motor drive cables, PC cables and adapters, flash sync cables and protective case |
* Specifications subject to change by the manufacturer without notice
Manufacturer Warranty
This product comes with a
12month Australian warranty
from PocketWizard Australia
Want to read more about warranties?