DJI Inspire 1 RAW Quadcopter with X5R 4K RAW Camera and Dual Controllers is a Ready-To-Fly aircraft with an impressive list of features and a customisable setup. It shoots 4K RAW video and 16 megapixel RAW stills, can be controlled from 5km away and uses GPS, Russian GLONASS, sonar waves, and visual sensors to fly both inside and outdoors. The Inspire will open up a world of high dynamic range aerial cinematography to inspire your imagination and ignite your creative spirit

Advanced 4K RAW Camera and 3 Axis Gimbal Performance

Advanced Zenmuse X5R 4K RAW Video Technology
The Inspire 1 RAW features DJI’s Zenmuse X5R camera body which boasts UHD and DCI 4K RAW video recording capability at a range of frame rates from 23.98 in 4K up to 59.94 at 1080p. This allows you to capture high resolution footage with an incredibly wide dynamic range and explore aerial angles in your production. The camera is also capable of recording 16 megapixel still RAW and JPEG images and you can easily pull an image from the 4K video files.

Micro Four Third Lens Mount
With a standard Micro Four Thirds mounting system you have a choice of lenses with full wireless control over the focus and aperture among other settings like auto exposure lock.

Included Lens
The 15mm (35mm equivalent) lens on the X5R is comprised of a 9-element construction and it uses a wide f/1.7 aperture to ensure a bright, sharp image quality with a 72° wide field of view. It can shoot single shots as well as capturing 7 frames a second in the burst mode. The camera uses a 4/3-inch CMOS sensor with an ISO range of 100-25600 to capture stunning images and video even if the sun sets and your light levels drop.

High Video Quality
The X5R is capable of exporting a maximum video bitrate of 2.4Gbps with a huge amount of image data, with a choice of video encoders MPEG4, AVC, H.264 and JPEG-Lossless (RAW) and the 3 video formats of MP4, MOV and Cinema DNG (RAW)

Highly Gradeable Footage with a Wide Dynamic Range
Offering options for colour styles from sRGB, Colour looks, LOG, Cine-D, D-LOG (RAW) can help you to take full advantage of the cameras impressive 12.8 stops of dynamic range to capture both shadows and highlights in perfect clarity.

3-Axis Gimbal Stabilisation
With an advanced 3-Axis Gimbal that receives information from the intelligent flight controller to compensate for flight motion, you can be confident your shots will be always level and smooth. The Gimbal features a custom-made processor which provides ultra-fast compensation for motion and tilt in real-time.

Low Mounting and Innovative Motors
The gimbal is mounted low on the aircraft to ensure maximum frame coverage and 360° of rotation and with the unique DJI design it is possible to perform -90° to +30° tilt with enhanced precision. The vibrations and shakes caused by the forces of flying are removed by the gimbals brushless motors to ensure you get stable professional aerial footage.

Innovative Aircraft Design

Aerodynamic Retractable Propeller Arms
The Inspire 1 RAW sports 4 propeller arms which act as the quadcopter’s landing gear when resting on the ground but are able to lift out of the camera’s way to provide a full 360° view when the aircraft is flying. They are constructed from light but incredibly durable carbon fibre so they do not weigh down the drone in the air but are able to support the unit on the ground.

Advanced Positioning Systems
Using a combination of Russian GLONASS and GPS satellites the aircrafts positing system is incredibly accurate allowing the drone to hover in the same spot regardless of wind currents. The inclusion of a Vision Position System and Optical Flow technology enables flights indoors. The quadcopter uses visual information and sonar waves which is sent to a dedicated CPU chip to calculate the aircraft’s position for situations where a GPS signal isn’t available.

13-inch Propeller Blades
Reinforced with carbon fibre the 13-inch “Z-Blade” quick release propellers are designed to give optimal performance with increased stability and durability.

Brushless Motors with Curved Magnets
The quadcopter features high end 3510H brushless motors which provide increased motor velocity from the previous model this means that you have better control and increased thrust. Inside each one there are magnets that work to rotate the propellers, the new design utilises curved magnets to decrease the airflow gaps in the motor which leads to much more efficient motor performance.

Single Wire Design and Air Pump
By using a single dense strand of copper wire rather than several different strands more copper is able to be used inside the motor to create more power. The addition of a centrifugal pump increases the airflow inside the motor for better temperature control and the new sinusoidal drive enabled electronic speed controller is even better than previous models.

Smart Power Management
The included intelligent battery allows for better power management by recording the voltage of each cell, the total lifetime charge, and the overall health of the battery. Using advanced algorithms, the inspire 1 is able to alert you based on how far away your drone to let you know when you should bring the aircraft back.

Sophisticated Internal Processors
Using an Inertial Measurement Unit (IMU) that has an in-built accelerometer and a 6-axis Gyroscope the drone is able to generate an incredible amount of environmental data. This information is sent on to the Main Controller which translates it into action, all while receiving and processing a huge amount of other sensory data and ensuring that the aircraft responds to commands instantly.

DJI Lightbridge for Wireless Transmission

Live High Definition Feed
A built-in DJI Lightbridge connection sends a live High Definition 720p video signal when connected to a screen or mobile device from the aircraft.

Maximum 5km Control Range
The live feed allows more accurate control and the 2.4Ghz wireless connection extends the control range to 5km.

Two Controllers for Dual Control
The improved connection allows the two included controllers to receive the signal from the quadcopter, so that one operator can focus solely on flying while a second operator controls the gimbal movement and direction of the camera. One controller must be designated as a master and the other as a slave unit and they are linked securely with a password. The option to outsource the camera movement to another controller means you can work closely with another operator to capture intricate aerial camera work.

Radio Controllers with Dedicated Control Layout

Separate Camera and Gimbal Controls
Both the included 2.4Ghz Radio Controllers makes aerial filmmaking easier than ever by offering camera and flight dedicated control buttons and dials. Featuring a built-in dial for gimbal tilt, a return to home button, and record and playback buttons as well as HDMI outputs, a USB port and a dedicated switch for the 3 main flight modes.

Built-in rechargeable Battery
The battery life of the controller is displayed live on the front of the remote and built in alerts trigger when power is running low so you can bring the aircraft home and re-charge with the included charging cable.

Failsafe Return Home Function
The 6000mAh LiPo 2S battery will also trigger a failsafe return to home function in the event of low battery life or a lost remote connection.

Intelligent Flight Modes

The DJI Inspire 1 features several different flight modes to give you complete control over your flights so you can unleash your creative energy with an all-new aerial perspective.

Course Lock
Enables you to specify a master direction so that the forward, back, left and right joystick controls are absolute, allowing you to control the direction of its flight irrespective of the direction the Phantom is facing. This makes it possible to rotate the drone without altering the relative direction of the flight controls for a simpler, more natural flying experience.

Home Lock
Sets the backward control on the joystick to navigate the drone back to the home position regardless of where it is or what direction it is facing. This feature can be useful if the drone is far away and it is difficult to fly the correct direction home.

Point of Interest
Allows you to set a specific object or location as a point of interest, so the drone can continuously orbit around it, allowing you to focus solely on the composition of the shot and camera operation for more precise results.
Follow Me

The drone automatically tracks the connected mobile device and follows you while capturing your movement from a unique aerial perspective.

Waypoint Navigation
Set multiple GPS waypoints and the aircraft automatically flies through each of the waypoints, so you can refine camera movements and easily re-create shots for additional coverage.