The Nikon SB-300 Speedlight is a great entry level on-camera flash for beginner and enthusiast Nikon shooters. Its compactand lightweight design fits unobtrusively in your gear bag and is suited to on-the-go photographers.
Compatible with the Nikon Creative Lighting System (CLS) or any Coolpix camera with i-TTLflash control makes set up incredibly simple. Just attach the flash to a compatible camera, switch on the power and let Nikon’s highly accurate i-TTL system automatically determine the correct light output.
The adjustable flash head can be tilted up to 120° upward, allowing you to fine-tune the direction of light according to your scenario. This flash head adjustability also enables you to bounce light of ceilings or walls to minimise shadows and produce a softer, more flattering effect.
Powered by 2 readily available AAA batteries, the Nikon SB300 flash is perfect for photographers wanting to expand their creative potential and explore the world of flash photography.
Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry
Guide number (20°C)
18/59 (ISO 100, m/ft)
Angle of illumination
Covers angle of view of 27 mm lens (FX format) or 18 mm lens (DX format)
Effective flash range (i-TTL)
0.6 m to 20 m; varies with ISO sensitivity, bounce angle, and aperture
Options available using camera controls
Flash control mode: i-TTL, manual Flash mode: Fill flash (front-curtain sync), front-curtain with slow sync, rear curtain sync, and rear-curtain with slow sync
Flash rotates vertically up to 120° with stops where the flash is pointing directly ahead and at 60°, 75°, 90°, and 120°
Two AAA alkaline or NiMH batteries
Charging complete: Lights Warning: Blinks
Lights for about 1/1650 s when fired at full power
Battery endurance and flash recycling time *1
Alkaline : Approx. 4.0 s (minimum recycling time *2), 70 or more uses / 4.0 - 30 s (endurance *3 / recycling time *2)NiMH : Approx. 3.5 s (minimum recycling time *2), 110 or more uses / 3.5 - 30 s (endurance *3 / recycling time *2)
Mounting foot lock lever
Locking pin prevents accidental detachment
Thermal cut-out, firmware update *4
Dimensions (W x H x D)
Approx. 57.4 x 65.4 x 62.3mm
Approx. 120g, including two AAA alkaline batteries Approx. 97g, body only
Soft Case SS-DC1
* Specifications subject to change by the manufacturer without notice
* Dispatch timeframes are indications only and may vary for multiple quantities. Timeframes are updated regularly during normal business hours.