The Epson Roll Media Adaptor is specifically designed for the Epson SC-P800 inkjet printer. The adapter enables use of roll based media in widths from 13" to 17" supplied on either a 2" or 3" core.

It attaches to the rear of the printer and supports a range of media types with prints made borderless or with borders.

Notes:
• Prints up to a maximum length of 3.3m can be made however accurate sizing cannot be guaranteed for prints over 1.1m.
• A minimum of 50mm will be lost at the start of each print job and a further 14mm at the end of each print job due to media feed requirements.
• If multiple images are sent to print as a single job borders between the images can be reduced to as small as 0mm.
• The printer/adapter does not include an auto-cutter so manual cutting is required.
• When printing on matte media resolution is restricted to a maximum of 1440x720dpi.
• Media with a weight of LESS THAN 250gsm may only be used if mounted on a 2" core. If such media is used on a 3" core it can damage the printer and invalidate warranty.