The DJI Phantom 4 Battery Charging Hub can charge up to three Intelligent Flight Batteries in sequence based on their remaining power level. This allows you to get your Phantom 4 drone into the air as soon as possible and not miss an important photography session or the opportunity to spend quality time with your family.

Charge Up To Three Batteries

The Charging Hub measures the charge left in each Intelligent Flight battery before the charging commences and the one with the largest amount of remaining power is charged first. This sequential charging ensures batteries with the most remaining power are charged first, allowing you to start flying your Phantom 4 drone sooner.

Storage Mode

There is a switch on the hub which can be used to move from the charging mode, into the storage mode. This storage mode is useful if you are not going to use the Phantom 4 drone for an extended period of time and want to ensure the batteries do not degrade by maintaining a certain amount of charge in them. In Storage Mode, the hub will either charge or discharge batteries to 50% power, the ideal state for long-term storage.

Three Charging Ports and LED lights

On the hub there are three charging ports and LED lights associated with each. These indicators enable you check if the charging of each battery is progressing normally, and turn solid green to indicate charging is complete.

Compatible with DJI Phantom 4 Batteries

The hub is specifically designed for use with the Intelligent Flight battery of the Phantom 4 drone and the charger provided with it.

Port for Updating Firmware

The charging hub comes with a port that connects to a computer via a micro-USB cable and is used to update the firmware to cater for future enhancements and improvements.