The PocketWizard PlusX is the simplest Wireless Flash Transceiver in the extensive PocketWizard range. Setup takes only seconds and consists of connecting a PlusX Transceiver to the hot-shoe of your camera and another PlusX Transceiver to your remote flash using an included cable.
Set both transceivers to the same channel and you are ready to shoot. The auto-sensing PlusX Transceiver is also compatible with many popular camera systems and acts as a wireless shutter release when combined with a dedicated remote camera triggering cable*. An auto-relay mode lets you trigger a remote camera and remote flashes using only 3 Pocketwizard Transceivers. Simply connect your flash to a PlusX Transceiver, your Camera to another PlusX Transceiver and trigger both with a 3rd PlusX transceiver in your hand. With 10 Standard Channels that are consistent across the entire PocketWizard range, you can be confident the Plus X will integrate seamlessly with your existing PocketWizard equipment. 100 hours of continuous operation is delivered through 2 AA batteries (not included) with a handyLED status indicator to indicate when battery levels are between 50% and 75% depleted. Synonymous withquality, reliability and exceptional range, the PocketWizard PlusX Transceivers are made in the USA and are backed by a 12 month warranty.
Manufacturer Code: 0893577001064
CE: 433.62 MHz EU/Asia/Other
10 channels Reverse compatible with all PocketWizard radios using Standard channels using same frequency.
Precision tuned internal coil
Backlit rotating dial
Up to 500 meters (Actual range is dependent on multiple factors including equipment, mode, environment, positioning, orientation and interference)
Up to 1/250 for focal plane shutters Up to 1/500 for leaf shutters
Up to 14.5 frames per second (FPS)
62 milliseconds in normal operation
LED: Green, Amber, Red status indications Solid Red: Triggering signal sending or receiving Single Green Blink: Status OK, > 50% battery life Double Amber Blink: Battery life < 50% but > 25% Triple Red Blink: Battery life < 25%, change batteries
Transmit Output Power:
Less than 1 milliwatt (0.001 watt)
Two (2), AA (LR6), 1.5v alkaline recommended NiMH, NiCAD, NiZn, Lithium acceptable (these chemistries may not report battery life accurately) DO NOT USE 3.6V Li-Ion AA cells!
Up to 100 hours (with alkaline batteries)
Max Port Sync Voltage:
300 Volts (Camera/Flash Port)
Mac Current Handling:
1.0 A peak, 0.2 A (1/5 Amp or 200 milliamp) continuous current limited
3 volts, safe for use with all digital and film cameras
High impact plastic with captive battery door
3.9 ounces (110 grams) with batteries installed
Height: 10.7 cm Width: 5.3 cm Depth: 3.0 cm
Above -15°C and below 50°C
Above -30°C and below 85°C (without battery)
3.5mm (1/8") stereo miniphone jack, hot shoe
Hot shoe, lanyard/D-Ring loop, 1/4-20 threaded insert
In the Box:
Quick Guide Stereo 3.mm (1/8") miniphone to miniphone cable Mono 3.5mm miniphone to locking PC cable Stereo 3.5mm miniphone to 6.3mm (1/4") adapter Lanyard
Isolation bar, trigger buttons, camera motor drive cables, PC cables and adapters, flash sync cables and protective case
* Specifications subject to change by the manufacturer without notice