The MyMyk SmartLynk is perfect for taking your DSLR and Mirrorless films and video clips to the next level. Supporting two microphones simultaneously, it represents a major step towards improving the sound quality and production value of your next project.
Works with SmartMyk & iPhone App
Pairing perfectly with the SmartMyk on-camera microphone and the MyMyk Camera Audio iPhone app, the mixer enables you to monitor your sound input prior to and during recording.
Built-in ACG Blocker
The built-in AGC Blocker has the ability to override your cameras internal Automatic Gain Control (AGC) settings, preventing unwanted hissing and providing better overall control, tailored to the specific scene or environment you’re shooting.
Two External Mic Inputs
Its two 3.5mm external microphone inputs can accept a wide range of external microphone, allowing you to use microphones specific to your shooting requirements or record high quality audio without the microphone being attached directly to the camera.
Independent Audio Level Control
Independent audio level controls are also available to further fine tune your audio levels, enabling you to create a more (or less) balanced soundscape across multiple sources.
Multiple Output Options
Additionally the output can be mixed or split to independent outputs for better versatility according to your shooting requirements and post-production workflow. Each channel can also be output to an audio recorder or the MyMyk Camera Audio iOS app for superior on-the-go convenience.
3.5mm Output for Audio Monitoring
The SmartLynk also features a 3.5mm output jack with volume control. This equips you with the ability to monitor the incoming audio using high quality headphones for superior accuracy.
Low Power Consumption
Weighing only 180grams, the MyMyk SmartLynk is powered by 2x AAA batteries which deliver an impressive run-time of over 40 hours.
Input impedance per channel
Output impedance – Mixer output to camera
Output impedance – Mixer output to smartphone
Input signal maximum per channel
Mixer frequency response
20Hz to 20kHz, ±3dB
Mixer noise RTI
Blocker output level
Tip of TRS
Output jack to camera, signal and blocker signal
Headphone amplifier output power per channel
250mW into 8Ω, 85mW into 32Ω
Headphone channel frequency response
20Hz to 20kHz, ±3dB
Headphone mix signal level control
Smart output jack to smartphone
3.5mm TRRS. SmartLynk will disable smartphones’ internal microphone via auto detect function.
Headphone source select switch
Smartphone or mixer
2 X 1.5 v AAA alkaline cells
Current consumption nominal
Integrated into the mix mode switch
Left & right level pots, fade to full adjust
* Specifications subject to change by the manufacturer without notice