Olympus E-3, E-510 and 70-300mm Firmware Updates
Olympus has today released firmware updates for the Olympus E-3 and Olympus E-510 D-SLR bodies also is a firmware update for the ZUIKO DIGITAL ED 70-300mm F4.0-5.6
The benefits Olympus has listed for the firmware updates are:
Olympus E-510:
Enabled use of the Image Stabilization function with non-Four Thirds System interchangeable lenses by inputting a specific focal length.
Olympus E-3:
- Enabled use of the Image Stabilization function with non-Four Thirds System interchangeable lenses by inputting a specific focal length.
- Matched the rotation of the dial on the rear of the Power Battery Holder HLD-4 and the movement direction of the AF target.
- Increased the number of storable still pictures by improving the battery check when the Power Battery Holder HLD-4 is attached.
- Focusing now stops immediately when the AF start button (AEL/AFL or Fn button) is released.
- Corrected the phenomenon where the flash control caused an under exposure while using bounce flash at short distances with the FL-50R or FL-36R Electronic Flash.
- Improved selection and prioritization of the central 5 ranging points when shooting in C-AF mode and Dynamic-single Target mode.
Zuiko Digital ED 70-300mm f/4-5.6:
- Stabilized exposure precision
The firmware updates and instructions can be found on Olympus Japan’s website.
http://www.olympus.co.jp/en/support/imsg/digicamera/download/software/firm/e1/


